During the process of using a stainless steel faucet, if it is found to be dirty or dirty, it is necessary to clean the stainless steel faucet. How to clean the stainless steel faucet? Although stainless steel faucets are relatively durable, they also need to be properly maintained during use. How to maintain stainless steel faucets?
1、 How to clean a stainless steel faucet
1. When cleaning, soak the stainless steel faucet with water where it needs to be cleaned first, and then use a soft bristle brush to brush the water repeatedly until it is brushed 4 to 5 times. Pour a little more of the household vinegar into the container and gently brush the stainless steel area that needs to be cleaned with a soft bristle brush at least 5 times. Then wrap the area where the vinegar has been brushed with cling film, and wait for half an hour before turning on the faucet. Gently wipe the stainless steel faucet with a clean cloth to make it shiny as new.
2. When there is no cling film, wrap the area that needs to be cleaned with a napkin first, then brush it with vinegar and wrap it again. Repeat the above steps until it is wrapped in 5 layers, and half an hour later when it is opened, the same result will be obtained.
3. You can also squeeze the toothpaste into the dirty area of the stainless steel faucet, then use a wet toothbrush dipped in the toothpaste to repeatedly scrub, then rinse it with water and dry it with a clean cloth. Use an old stockings to wipe and polish back and forth on the faucet. Then wipe the metal surface of the faucet back and forth with orange peel (orange peel contains citric acid, which can maintain the stainless steel surface), and then wipe it clean with a clean soft cloth. At this point, the faucet can restore its former brilliance.
2、 How to maintain a stainless steel faucet
1. When installing, try not to collide with hard objects, and do not leave cement, glue, and other substances on the surface of the faucet to avoid damaging the surface coating luster. If a stainless steel faucet is prepared for use in a newly built house, as the water supply network is newly laid, there may be sand and gravel impurities in the water. Before installation, it is important to remove debris from the water pipe. Only after the waterproofing becomes clean can the water quality become clean.
2. When turning the handle of the faucet, do not use too much force. Simply turn it gently to avoid causing damage. For traditional spiral stainless steel faucets, do not use a lot of force to tighten them to avoid damaging the rubber sealing layer.
3. After use, the surface of the stainless steel faucet should be wiped clean by hand to avoid rusting and affecting its glossiness. If the water pressure of other faucets is normal and one faucet is not flowing smoothly, the net cover at the faucet outlet can be removed for cleaning, and it can generally be restored to its original state.
How to clean a stainless steel faucet? Cleaning a stainless steel faucet is not difficult, as long as there is no dirt on its surface that is difficult to clean, it is also easy to clean it. How to maintain a stainless steel faucet? Maintaining stainless steel faucets requires long-term adherence, which is also reflected in the small details of every use of stainless steel faucets.